Fresco Painting

fresco painting, method of painting water-based pigments on freshly applied plaster, usually on wall surfaces. The colours, which are made by grinding dry-powder pigments in pure water, dry and set with the plaster to become a permanent part of the wall. Fresco painting is ideal for making murals because it lends itself to a monumental style, is durable, and has a matte surface.

Fra Angelico: The Annunciation

Buon, or “true,” fresco is the most durable technique and consists of the following process. Three successive coats of specially prepared plaster, sand, and sometimes marble dust are troweled onto a wall. Each of the first two rough coats is applied and then allowed to set (dry and harden). In the meantime, the artist, who has made a full-scale cartoon (preparatory drawing) of the image to be painted, transfers the outlines of the design onto the wall from a tracing made of the cartoon. The final, smooth coat (intonaco) of plaster is then troweled onto as much of the wall as can be painted in one session. The boundaries of this area are confined carefully along contour lines, so that the edges, or joints, of each successive section of fresh plastering are imperceptible. These sections are called giornate, a “day’s work.” The tracing is then held against the fresh intonaco and lined up carefully with the adjacent sections of painted wall, and its pertinent contours and interior lines are traced onto the fresh plaster; this faint but accurate drawing serves as a guide for painting the image in colour.

Giotto: The Nativity

A correctly prepared intonaco will hold its moisture for many hours. When the painter dilutes his colours with water and applies them with brushstrokes to the plaster, the colours are imbibed into the surface, and as the wall dries and sets, the pigment particles become bound or cemented along with the lime and sand particles. This gives the colours great permanence and resistance to aging, since they are an integral part of the wall surface, rather than a superimposed layer of paint on it. The medium of fresco makes great demands on a painter’s technical skill, since he must work fast (while the plaster is wet) but cannot correct mistakes by overpainting; this must be done on a fresh coat of plaster or by using the secco method.

Fresco secco (“dry fresco”) is a process that dispenses with the complex preparation of the wall with wet plaster. Instead, dry, finished walls are soaked with limewater and painted while wet. The colours do not penetrate into the plaster but form a surface film, like any other paint. Secco is useful for detailed painting and for retouching true fresco.

Michelangelo: The Creation of Adam

The origins of fresco painting are unknown, but it was used as early as the Minoan civilization (at Knossos on Crete) and by the ancient Romans (at Pompeii). The Italian Renaissance was the great period of fresco painting, as seen in the works of Cimabue, Giotto, Masaccio, Fra Angelico, Correggio—who favoured the sotto in su (“from below to above”)_technique—and many other painters from the late 13th to the mid-16th century. Michelangelo’s paintings in the Sistine Chapel and Raphael’s Stanza murals in the Vatican are the most famous of all frescoes. By the mid-16th century, however, the use of fresco had largely been supplanted by oil painting. The technique was briefly revived in the 20th century by Diego Rivera and other Mexican muralists as well as Francesco Clemente.