Photography, Technology Of

technology of photography, equipment, techniques, and processes used in the production of photographs.

The most widely used photographic process is the black-and-white negative–positive system (Figure 1). In the camera the lens projects an image of the scene being photographed onto a film coated with light-sensitive silver salts, such as silver bromide. A shutter built into the lens admits light reflected from the scene for a given time to produce an invisible but developable image in the sensitized layer, thus exposing the film.

During development (in a darkroom) the silver salt crystals that have been struck by the light are converted into metallic silver, forming a visible deposit or density. The more light that reaches a given area of the film, the more silver salt is rendered developable and the denser the silver deposit that is formed there. An image of various brightness levels thus yields a picture in which these brightnesses are tonally reversed—a negative. Bright subject details record as dark or dense areas in the developed film; dark parts of the subject record as areas of low density; i.e., they have little silver. After development the film is treated with a fixing bath that dissolves away all undeveloped silver salt and so prevents subsequent darkening of such unexposed areas. Finally, a wash removes all soluble salts from the film emulsion, leaving a permanent negative silver image within the gelatin layer.

A positive picture is obtained by repeating this process. The usual procedure is enlargement: the negative is projected onto a sensitive paper carrying a silver halide emulsion similar to that used for the film. Exposure by the enlarger light source again yields a latent image of the negative. After a development and processing sequence the paper then bears a positive silver image. In contact printing the negative film and the paper are placed face to face in intimate contact and exposed by diffused light shining through the negative. The dense (black) portions of the negative image result in little exposure of the paper and, so, yield light image areas; thin portions of the negative let through more light and yield dark areas in the print, thus re-creating the light values of the original scene.