Solar Pond

solar pond

solar pond, any large human-made body of salt water that collects and stores solar energy, thereby providing a sustainable source of heat and power. Although research on the practical applications of solar ponds did not begin until the late 1940s, a natural lake particularly well-suited for use as a solar pond was discovered in the Transylvania region of eastern Europe in the early 1900s. Since that time, interest in solar pond development has expanded throughout the world. Today, notable solar ponds can be found in Israel, India, and the United States (in El Paso, Texas). However, many solar pond projects have been abandoned because of the high cost of solar pond production and maintenance compared with that of facilities for gas and fossil fuels. Still, interest in the solar pond as a source of sustainable energy continues worldwide.

In freshwater ponds, the Sun heats the water, and the hot water rises. The water cools through evaporation as the heat is released to the atmosphere, keeping the pond water at atmospheric temperature. Solar pond technology, on the other hand, attempts to prevent the loss of heat from water through the use of salt, the concentration of which increases with depth.

Solar ponds are of two types: non-convecting and convecting. The more common non-convecting solar pond reduces heat loss by preventing convection (the transfer of heat from one place to another by the movement of fluids) with the addition of a concentration of 20–30 percent salt to the bottom level (lower convective zone) of the pond. When saturated with high amounts of salt in the form of concentrated brine, the temperature of the bottom level rises to about 100 °C (212 °F) as heat from the Sun is trapped. The middle level (non-convective zone) receives a lower amount of salt than the bottom level. Because it is lighter than the bottom level but heavier than the top level, the water in the middle level is unable to rise or sink. The middle level, therefore, halts convection currents and acts as an insulator, trapping sunlight in the bottom level. In the top level (upper convective zone), where there is little salt, the water remains cold. Fresh water is added to that level, and saline water is drained. Finally, heat from the bottom level is transferred to pipes circulating through the pond to extract thermal energy.

In contrast to the non-convecting pond, convecting solar ponds trap heat by stopping evaporation rather than by stopping convection. The structure consists of a large bag of water with a blackened bottom, foam insulation below the bag, and two layers of plastic or glass glazing on top of the bag; the design allows convection but prevents evaporation. The Sun heats the water during the day. Then, at night, hot water is pumped into heat-storage tanks.

Heat generated by solar ponds has many applications and can cut down on the use of fossil fuels. The heat extracted from the pond enables the production of chemicals, food, textiles, and other industrial products. Heat from the pond can also be used to warm greenhouses, swimming pools, and livestock buildings. The heat can be converted to electricity through the use of the organic Rankine cycle engine, a relatively efficient and economical means of solar energy conversion, which is especially useful in remote locations. The solar pond can purify water for municipal water systems through desalination and can serve as a receptacle for brine disposal resulting from the extraction of crude oil from ocean drilling.

The use of a solar pond has several benefits. Since it has built-in thermal energy storage, it can be used all year, day and night, regardless of weather. The solar pond is especially attractive as an alternative to fossil fuel technologies in rural areas in less-developed countries where large ponds can be built. Energy from a solar pond is more cost-effective than energy from the flat-plate solar water-heating systems that are commonly used in homes. Since the pond provides heat energy without burning fuel, it does not contribute to air pollution and conserves traditional energy resources.

At the same time, the solar pond has drawbacks. It requires a large area of land and therefore may be unsuitable for densely populated areas. The pond also requires a large supply of salt water and a high level of solar energy input. In addition, although any qualified engineer can construct solar ponds, they require constant maintenance. For example, evaporated surface water must be replenished and accumulated salt removed from non-convecting ponds.