Iron Processing

iron processing, use of a smelting process to turn the ore into a form from which products can be fashioned. Included in this article also is a discussion of the mining of iron and of its preparation for smelting.

Iron (Fe) is a relatively dense metal with a silvery white appearance and distinctive magnetic properties. It constitutes 5 percent by weight of the Earth’s crust, and it is the fourth most abundant element after oxygen, silicon, and aluminum. It melts at a temperature of 1,538° C (2,800° F).

Study the production and structural forms of iron from ferrite and austenite to the alloy steelSee all videos for this article

Iron is allotropic—that is, it exists in different forms. Its crystal structure is either body-centred cubic (bcc) or face-centred cubic (fcc), depending on the temperature. In both crystallographic modifications, the basic configuration is a cube with iron atoms located at the corners. There is an extra atom in the centre of each cube in the bcc modification and in the centre of each face in the fcc. At room temperature, pure iron has a bcc structure referred to as alpha-ferrite; this persists until the temperature is raised to 912° C (1,674° F), when it transforms into an fcc arrangement known as austenite. With further heating, austenite remains until the temperature reaches 1,394° C (2,541° F), at which point the bcc structure reappears. This form of iron, called delta-ferrite, remains until the melting point is reached.

The pure metal is malleable and can be easily shaped by hammering, but apart from specialized electrical applications it is rarely used without adding other elements to improve its properties. Mostly it appears in iron-carbon alloys such as steels, which contain between 0.003 and about 2 percent carbon (the majority lying in the range of 0.01 to 1.2 percent), and cast irons with 2 to 4 percent carbon. At the carbon contents typical of steels, iron carbide (Fe₃C), also known as cementite, is formed; this leads to the formation of pearlite, which in a microscope can be seen to consist of alternate laths of alpha-ferrite and cementite. Cementite is harder and stronger than ferrite but is much less malleable, so that vastly differing mechanical properties are obtained by varying the amount of carbon. At the higher carbon contents typical of cast irons, carbon may separate out as either cementite or graphite, depending on the manufacturing conditions. Again, a wide range of properties is obtained. This versatility of iron-carbon alloys leads to their widespread use in engineering and explains why iron is by far the most important of all the industrial metals.